Since the National Institute of Standards and Technology (NIST) is conducting a multi-year study, with the support of the National Institute of Justice (NIJ) and the NIST Office of Law Enforcement Standards (OLES), to examine the repeatability of fire patterns with the primary objective of assessing the repeatability of fire patterns on gypsum board exposed to a limited range of source fires, the focus of the current article is to provide an overview of the uncertainties of the measurements.
The study required the use of a variety of measurements to determine the repeatability of the source fires in terms of heat release rate, temperature, heat flux, and flame height. Replicate source fire experiments were conducted in an oxygen consumption calorimeter to examine the repeatability of the fires in terms of the heat release rate. The flame movement and height for each fire were recorded with photographs and videos. The fire pattern experiments were conducted in a three-walled structure with a full floor and partial ceiling constructed from wood framing and lined with painted gypsum board. The source fires were positioned against the rear wall, midway along its length. Replicate experiments were conducted with each fuel. The fire patterns were documented and analyzed for repeatability. The fire pattern height results were then compared to the mean flame height results to examine the level of agreement. (Publisher Abstract)
810 Seventh Street NW, Washington, DC 20531, United States